Project: Phone Stand 📱

Build a functional phone stand that prints without supports!

Requirements

Create a stand with:

1. Stable base (60-80mm deep, 80-100mm wide)


2. Angled back support (60-70° angle)


3. Front lip (stops phone from sliding)

Design Constraints

• ✅ No overhangs > 45°
• ✅ Self-supporting design
• ✅ Minimum 1.2mm wall thickness
• ✅ All parts on build plate

Suggested Approach

1. Start with a base box
2. Add an angled back support
3. Add a small front lip
4. Check Print Readiness panel

Bonus: Name all your objects meaningfully!